PG Shields

By Major Bloodnok
March 19 2004

PG Final T-Shirt and Flag Transfers

The main images have been put together at 200 dpi resolution. If you do everything right, the large shield should be 10 cm by 15 cm, and the small one 3 cm by 4.5 cm when printed.

Instructions

Click on one of the thumbnails below. This should bring up a new window with the full sized image in it. Right-click and save the image to your hard disk.

Load it up into any half-decent image processing program (i.e anything except Microsoft Paint).

(For the T-shirt shield only) put your name in the area reserved for that at the top.

Flip the image. This is important - you must flip the image left-to-right, or it'll come out backwards when you iron it on.

Print on to inkjet transfer paper (use print preview to make sure that it's the right size), cut out close to the edges of the design and carefully iron it onto your chosen article.

T-shirt shieldT-Shirt design

Large shieldLarge shield
Large shieldSmall shield

Bookmark or share this story with: